EST3 to BMS communication

[kantula611]

Dear All.
I am Kan from vietnam. now i am using EST3 panel, and i want to make a connect from EST3 panel to BMS via TCP/IP, with this connect i can control and supervision EST3 panel from BMS ( Building management System ).
I find on internet i known the " EST3 to BMS communication" with FSB-FC can connect EST3 panel to BMS via TCP/IP, but it not mention how can control EST3 panel from BMS ?
Pls help me this problem.

[Leo]

I think you misunderstand what BMS is. It is a hardware device that is used to connect a rs232 serial devices via a Ethernet connect.
it is not software that you can control the EST3 panel.

[junjun]

Gateway device like FSB-PC is use only to monitor events coming from Est-3 panel.

[Leo]

what is it like a printer?

[junjun]

not really..gateway device like fsb-pc is a protocol converter which enables devices using est3 protocol to send information and communicate via Ethernet, Modbus and lonworks networks.

[donpccc]

We've bought FSB-PC try to connect with other brands but never successful. Almost of thems down to low lever dry contact. If any one connecting success, please share everybody some advice. so SAD!!!

[Leo]

FSB-PC is still a mystery to me.
So, you have a EST3 you put the FSB-PC on the RS232 port of the panel, then someone writes a program like BMS?
if so is BMS the only program?

[junjun]

here's the link for further information http://www.fieldserver.com/products/drivers/EST3.php

[donpccc]

here's the link for further information http://www.fieldserver.com/products/drivers/EST3.php

Thanks for your links, let's me try first! so sad we never connection with BMS successful

[donpccc]

Mr JunJun, I read your comment in title Connection with FSB-PC, i used your sample config to download the FSB-PC. Then the BMS only see the node base information, and i don't understand your config, can you help me more detail, can i sent you my file.SDU config.