Siemens FireSeeker FS-250 programming software
Re: Siemens FireSeeker FS-250 programming software
FS-CT2 V 7.7 attached
- Attachments
-
- FS-CT2_7_7_7.exe
- (15.06 MiB) Downloaded 1909 times
Re: Siemens FireSeeker FS-250 programming software
Awesome haven’t tried it yet but I’m grateful
Re: Siemens FireSeeker FS-250 programming software
Does anyone have the pinout for the Siemens RS232 to RJ11 adapter?
-
- Posts: 11
- Joined: Sat Feb 10, 2018 11:22 pm
Re: Siemens FireSeeker FS-250 programming software
I need to program an FS-250 fireseeker by Siemens.. ( need to program in 17 smokes and 2 pulls on an existing system) . Do you have a manual ? I would also consider using software to program.
Do you have pin outs on how to create download cable?
Do you have pin outs on how to create download cable?
Re: Siemens FireSeeker FS-250 programming software
I have the actual Siemens programming cable coming Monday. When I get it I will get the pinout.
- Attachments
-
- Siemens-Fireseeker-FS-250-Operation-Installation-Manual.pdf
- Install/Programming Manual
- (670.55 KiB) Downloaded 1001 times
-
- Posts: 11
- Joined: Sat Feb 10, 2018 11:22 pm
Re: Siemens FireSeeker FS-250 programming software
When it says you need “configuration tool”
Are we talking about the cable?
What is part# , or better yet where can I buy cable also?
Are we talking about the cable?
What is part# , or better yet where can I buy cable also?
Re: Siemens FireSeeker FS-250 programming software
Siemens 500-644138
-
- Posts: 11
- Joined: Sat Feb 10, 2018 11:22 pm
Re: Siemens FireSeeker FS-250 programming software
Much appreciated.
Thank you
Thank you
Re: Siemens FireSeeker FS-250 programming software
Thank you firetruk I programed my 1st FS250 by the computer today.
Re: Siemens FireSeeker FS-250 programming software
dougncin wrote:Looking for Siemens FireSeeker FS-250 programming software. I typically hand program thru keypad but would like to start doing on computer. I'm typically just changing monitoring info or changing descriptions on zones but still would like the software.
looks like I need Model FS-CT2 configuration tool plus software
Doug