MIRTONE MODEL QUICKSTART

[delanil]

hI ALL,

I have a panel , which is Mirtone make Quickstart . I have used EST QS-CU software but it does not communicate.

So , I have replaced CPU ,now its communicating with CPU . But Smoke detectors also is EST-Mirtone Type. So I get trouble for all detectors . Detectors are working fine on smoke test, Hooter are also activated . But it shows traouble afor all the detectors.

Some one Pls Help to sort out this problem.

regards

[FVILLA]

hi, you need to put back the older cpu an used the mirtone Quickstart software MIRQS-CU.

regards...

[delanil]

Older Mirtone CPU is fail aow i have to use this QS4 CPU only.

Currently i am getting alarms if testing any detector . But i don get any troubles for open/ short in loop.

[Freaky76er]

mirtone quickstart = Mirtone devices

est quickstart = Est devices

had a Mirtone cpu Panel fail 8 months ago, tried to swap with EST QS CPU, ended up replacing all smoke detectors due to non-compatibility

[Leo]

per EST tech support the smokes are NOT compatible, but the modules are compatible .