PXN Plus Communication Problem

vtzram · Post by **vtzram** » Fri Oct 29, 2010 1:44 pm

card worked fine for almost a year and after that it is not communicating to software neither to local computer.But all my readers connected to controller worked for some days (16000 badges).
Can you advise me what might be problem and any troubleshooting to be done.

BeJimmieevisk · Post by **BeJimmieevisk** » Mon Sep 23, 2019 12:27 pm

I have an stfm board with this card installed and would like to test it but i have no software.
Can somebody share please.

Vortex Atonce -Plus /286

Thanks.

Post by **Leo** » Sat Oct 30, 2010 9:10 am

these boards are a pain in the ass they are not as well built as the older PX boards.
Without a spare pxnPlus board trouble shooting is not easy.
You can web into the card and change the settings,the board looks like it is going to work but it will not communicate upstream,
When most boards broke you can just tell, this one lets you think it should still be able to work so without a spare you keep playing with it.

You need to just replace this board, If you send the broken board back for repair please let me know how it want.

vtzram · Post by **vtzram** » Sat Oct 30, 2010 10:53 am

As of now replaced card with new one and system is working,but would like to know the troubleshooting exercise for the same...........

TheAlarmTech.com