Detector Compatibility Fault

[akrajib143]

Hi,
I am facing a problem Detector Compatibility Fault of XLS-1000 Honeywell fire alarm control panel.
we are used all detector of Honeywell XLS-PS/HRS. Now this detector is not available in Bangladesh. then I try to installed SIGA series (EST) SIGA-PS/HRS. But Compatibility Fault Shown in the Fire alarm Panel.

Which device we can use instead of XLS-PS/HRS.

Thanking You,
Enamul

[old_tech]

ebay

[MartinTong]

Hi,
I am facing a problem Detector Compatibility Fault of XLS-1000 Honeywell fire alarm control panel.
we are used all detector of Honeywell XLS-PS/HRS. Now this detector is not available in Bangladesh. then I try to installed SIGA series (EST) SIGA-PS/HRS. But Compatibility Fault Shown in the Fire alarm Panel.

Which device we can use instead of XLS-PS/HRS.

Thanking You,
Enamul

need to replace all detector in same loop (to SIGA) and use EST3 dongle to download

[akrajib143]

[need to replace all detector in same loop (to SIGA) and use EST3 dongle to download]

I have 3-SDU ver. 3.4 & 3.72 Software and Honeywell Dongle.
is it possible to download and programming (SIGA)?

[Hiep Nguyen]

[need to replace all detector in same loop (to SIGA) and use EST3 dongle to download]

I have 3-SDU ver. 3.4 & 3.72 Software and Honeywell Dongle.
is it possible to download and programming (SIGA)?

Dear Bro,

You can't replace that. Because each brand has a different product. The EST sensor can't replace the honeywell and vice versa.

Good luck,
Hiep Nguyen.

[akrajib143]

[Dear Bro,

You can't replace that. Because each brand has a different product. The EST sensor can't replace the honeywell and vice versa.

Good luck,
Hiep Nguyen]

What is the solution?

I have Honeywell XLS-1000/200 3-SDU Dongle.

Thanking You?
Enamul

[Hiep Nguyen]

[Dear Bro,

You can't replace that. Because each brand has a different product. The EST sensor can't replace the honeywell and vice versa.

Good luck,
Hiep Nguyen]

What is the solution?

I have Honeywell XLS-1000/200 3-SDU Dongle.

Thanking You?
Enamul

Dear Enamul,

The solution is:
1. You need replace the detector same as old detector ( this mean is: same type and same brand, may be different model).
2. Then you use Honeywell XLS-1000 software to reconfiguration it.
Can you sale 3-SDU Dongle for me? I need it.

Regards,
Hiep Nguyen.