SIGA-AB4G or GSA-AB4G- SOUNDER BASE DETECTOR
Re: SIGA-AB4G or GSA-AB4G- SOUNDER BASE DETECTOR
Yes you should have CR in order to silence sounder base , so check your rules and check CR Wethersfield it's working or not.
-
arindam_bangalore
- Posts: 11
- Joined: Sun May 28, 2017 3:37 am
SIGA-AB4G or GSA-AB4G- SOUNDER BASE DETECTOR
I AM FACING ONE ISSUE WITH EST3 PANEL.
A SOUNDER BASE ACTIVATES WHEN ALARM IS TRIGGERED AND MAKE NOISE AS LIKE A HORN BUT IT DO NOT GOES TO SILENT MODE ONCE THE PANEL IS PRESSED WITH "ALARM SILENCE"
EARLIER IT WAS WORKING AND THERE IS NO RULE TO SILENCE IT.
SINCE THIS IS A SERVICE CALL I HAVE NO CLUE WHATS WRONG.
SOME PEOPLE SAYS WE NEED A SIGA-CR CONTROL MODULE TO SILENCE IT.
IS IT REALLY REQUIRED?
A SOUNDER BASE ACTIVATES WHEN ALARM IS TRIGGERED AND MAKE NOISE AS LIKE A HORN BUT IT DO NOT GOES TO SILENT MODE ONCE THE PANEL IS PRESSED WITH "ALARM SILENCE"
EARLIER IT WAS WORKING AND THERE IS NO RULE TO SILENCE IT.
SINCE THIS IS A SERVICE CALL I HAVE NO CLUE WHATS WRONG.
SOME PEOPLE SAYS WE NEED A SIGA-CR CONTROL MODULE TO SILENCE IT.
IS IT REALLY REQUIRED?