TheAlarmTech.com

I understand that these panels are no longer offered. I have a customer with an MIR-2 with a mapping error. Will the EST version of 2-SDU work with this system?
If not, is the Mirtone software available?

There is not a lot of mirtone panels out there, so it maybe a problem getting a direct answer to your question.

That said I work for ADT and there was different software for EST3,EST2 and Quickstart, now it's all the same.
the only time I found a problem was trying to import a ADT exported quickstart database(ADT version of the QS program) into the EST version of the quickstart program. But I was able to upload the program from a ADT QS panel into the EST QS program.

This may not help you much but I think if it would not work EST would need to have kept up with the mirtone software versions.

If you find anything interesting please let us know, thanks

pyrosucks wrote:I understand that these panels are no longer offered. I have a customer with an MIR-2 with a mapping error. Will the EST version of 2-SDU work with this system?
If not, is the Mirtone software available?

Hi, several years ago i download the MIR-2 software from the vigilant/est web, i think is the same as EST-2, but im not sure since i never used on a MIR panel if you needed sent me a PM.

regards...

Just wanted to follow up with some information that may help someone.

First, thanks to FVILLA for helping me out with the software.

I have found that there is no difference in the 2-SDU for Mirtone from the EST version. I have used the EST version to rebuild an MIR-2 database and everything is working normally. Download went fine and all the devices are functioning. However, I did find that the smoke detectors are NOT interchangeable with EST. This was expected as I have read it elsewhere in the forum.

Hi everybody. I figured this would be the place to post. I too have a customer with a Mir-2 version of EST-2. I am EST-2 certified and have been for years but I was just wondering if I need different software than the usual 2-SDU. If so is there anywhere I can get it because otherwise my option would be to rebuild the EST-2 using just regular EST detector devices and I don't know how thrilled my customer would be in doing that.

Thanks.

You would only need to replace the smokes if the panel is replaced with an EST version EST2.
I think pyrosucks tested it and there is no different. You can use your EST version EST2 software.