Page 1 of 1
FCI 7100 reporting code for CID
Posted: Wed Jul 29, 2020 2:25 pm
by rondparker
My panel is set for option '6' which is the 4/2 transmission to the central station. I cannot find the option for CID. Can anyone help please?
Re: FCI 7100 reporting code for CID
Posted: Wed Jul 29, 2020 4:33 pm
by Leo
main->config->dact->account options->comm format
in manual page 33
Re: FCI 7100 reporting code for CID
Posted: Thu Jul 30, 2020 8:36 am
by rondparker
I don't have the manual. I can get to the programming on the panel but do not have the 'option' number for CID. Right now it is '6' for 4/2 reporting. Can you help?
Thanks
Re: FCI 7100 reporting code for CID
Posted: Thu Jul 30, 2020 12:01 pm
by pyrosucks
FCI 7100 Install manual
Re: FCI 7100 reporting code for CID
Posted: Thu Jul 30, 2020 2:14 pm
by rondparker
I am very grateful. It helps me a lot. Thank you.
Re: FCI 7100 reporting code for CID
Posted: Tue Aug 11, 2020 6:16 pm
by rondparker
Now that the Contact ID option has been successfully changed (it is number '2') in the DACT programming I am looking to find out what numbers FCI is sending for their modules.
I know from Firelite that they add '159' to the device ID of a module, so a pull station set to 12 would send a '171' to the central station.
My FCI 7100 sends a '223' for a module set to '150' - is there also a standard offset to add? Anyone know?
Re: FCI 7100 reporting code for CID
Posted: Sat Aug 15, 2020 8:21 am
by rondparker
Issue solved. Thank you. This panel does not send individual device numbers