Page 1 of 1
Re: Siemens FireSeeker FS-100 FS-CT Configuration Tool
Posted: Sat Apr 14, 2018 3:30 pm
by Gkuyuk
Please check this thread, you should be able to configure the panel. You will need the Serial Cable and the part number is provided in the thread.
http://www.thealarmtech.com/forum/viewt ... =54&t=1464
Re: Siemens FireSeeker FS-100 FS-CT Configuration Tool
Posted: Tue May 01, 2018 8:40 am
by dougncin
Different software between the 100 and 250.
Re: Siemens FireSeeker FS-100 FS-CT Configuration Tool
Posted: Tue Jul 17, 2018 11:23 am
by pyrosucks
Siemens FireSeeker FS-100 FS-CT Configuration Tool
Posted: Thu Mar 15, 2018 8:35 pm
by dougncin
Probably a small miracle but looking for the FS-CT Configuration Tool for Siemens FS-100 Panel.
Thanks Doug