Page 1 of 2
ext 3 panel reset and restart
Posted: Wed Nov 20, 2013 10:22 pm
by Nirujan
can you explain me what happening in est3 panel while reset and restarting and maximum how many times i can do this.
Re: ext 3 panel reset and restart
Posted: Fri Nov 22, 2013 7:23 pm
by MartinTong
Nirujan wrote:can you explain me what happening in est3 panel while reset and restarting and maximum how many times i can do this.
unlimited
Re: ext 3 panel reset and restart
Posted: Sun Nov 24, 2013 2:41 am
by Nirujan
If I do this more time means panel will affect or not?
Re: ext 3 panel reset and restart
Posted: Wed Nov 27, 2013 8:08 pm
by MartinTong
Nirujan wrote:If I do this more time means panel will affect or not?
no affect
Re: ext 3 panel reset and restart
Posted: Wed Dec 04, 2013 5:24 am
by junjun
Unless you are maintaining huge network or facility, restarting a panel could be a disaster.
Re: ext 3 panel reset and restart
Posted: Tue Dec 17, 2013 4:48 am
by briac
hi, I have network with fiber optic using 3FIBMB2 for the whole installation,
In class B the network is running correctly but if I want to convert it to class A the Master panel (the panel number 1)is restarted automatically for many times a minute and I don't know why?
there are some fault like communication fault to 3 or 4 panel in the same time and this fault comes and goes like that.
the number of node is 48 actually ,future project will increase this number.
help please,I need this installation to be in class A because some of the distance of the panel is about 12km, 9km.
Re: ext 3 panel reset and restart
Posted: Tue Dec 17, 2013 5:19 am
by Nirujan
can you tell me how you had convert to class A from class B?
Re: ext 3 panel reset and restart
Posted: Tue Dec 17, 2013 5:32 am
by Nirujan
junjun wrote:Unless you are maintaining huge network or facility, restarting a panel could be a disaster.
can you explain me how it will be affect the large network?
Re: ext 3 panel reset and restart
Posted: Thu Dec 19, 2013 12:28 am
by MartinTong
Nirujan wrote:junjun wrote:Unless you are maintaining huge network or facility, restarting a panel could be a disaster.
can you explain me how it will be affect the large network?
may be the class A connection in / out wrong,
Re: ext 3 panel reset and restart
Posted: Thu Dec 19, 2013 6:45 am
by Leo
reset and restart are two different things.
reset is only needed to reset a device that is latched active, the system checked to see if the device is normal and if so puts it back to the normal state, if not the system leaves it active.
restarting is the same as powering the system down and back up.