Page 1 of 1
EST-3 PRINTER
Posted: Wed Aug 14, 2013 9:19 am
by bruno_cardoso
Hi,
If a have a 3-rs232 board installed , can i connect any 9-pin dot matrix printer?
Epson Lx300 for example.
Thanks
Bruno
Re: EST-3 PRINTER
Posted: Wed Aug 14, 2013 7:44 pm
by MartinTong
bruno_cardoso wrote:Hi,
If a have a 3-rs232 board installed , can i connect any 9-pin dot matrix printer?
Epson Lx300 for example.
Thanks
Bruno
Can
Re: EST-3 PRINTER
Posted: Sat Aug 17, 2013 8:49 am
by old_tech
Any serial printer or even your pc can be used to capture data from the port. (Provided you've enabled the card in the SDU)
Re: EST-3 PRINTER
Posted: Thu Jan 09, 2014 8:07 am
by lts-maroc
Dear Friends,
Can you give me the schematic of this connection from Epson printer that has 25 pins .
As you know we can just connect Tx, Rx and Com in EST3.
Best Regards.
Re: EST-3 PRINTER
Posted: Sun Jan 12, 2014 11:57 pm
by bvale
For example 9 and 25 pin
Re: EST-3 PRINTER
Posted: Sat Feb 15, 2014 10:32 am
by hijazih
Dear lts-maroc,
note the attachement.
hope this works with you