SP - How to Setup SP Com port
Posted: Fri Nov 13, 2009 9:21 am
The com port setup is not in the Secure Perfect program, it is in the Computers Device Manager
This is the only program I have found does not setup the comm port, it uses the device manager.
You can find Device Manager in the Computer Management utility, the System applet in Control Panel
Windows 7 and Vista
1. From the Start menu, select Computer.
2. Near the top of the resulting window, click System properties.
3. On the left, click Device Manager.
Windows XP
1. From the Start menu, select My Computer. Alternatively, double-click My Computer on the desktop.
2. Under "System Tasks", click View system information.
3. In the System Properties window, click the Hardware tab, and then click Device Manager.
Windows 2000
1. From the Start menu, select Settings, and then Control Panel.
2. Double-click the System icon.
3. Select the Hardware tab, and then click Device Manager
(( you will need to reboot the computer ))
This is the only program I have found does not setup the comm port, it uses the device manager.
You can find Device Manager in the Computer Management utility, the System applet in Control Panel
Windows 7 and Vista
1. From the Start menu, select Computer.
2. Near the top of the resulting window, click System properties.
3. On the left, click Device Manager.
Windows XP
1. From the Start menu, select My Computer. Alternatively, double-click My Computer on the desktop.
2. Under "System Tasks", click View system information.
3. In the System Properties window, click the Hardware tab, and then click Device Manager.
Windows 2000
1. From the Start menu, select Settings, and then Control Panel.
2. Double-click the System icon.
3. Select the Hardware tab, and then click Device Manager
(( you will need to reboot the computer ))