Kantech - IPlink
Posted: Tue Sep 07, 2010 11:49 am
Two ways to set the IP info, KTfinder.exe and web browser
web browser, reset the iplink to static IP, it will set the iplink to 192.168.1.2
If you are having problems getting it to work: LAN/WAN
1. Disable the WINDOWS FIREWALL
2. Operation ->Site -> Gateway list - Communication Status - Gateway not Connected (EntraPass Corporate Gateway Services is stopped start the services)
3. Check PC's IP info - C:\IPconfig /all
4. ping the iplink from the server
If you are having problems getting it to work: Public IP
set entraPass to the public IP, forward the ports
web browser, reset the iplink to static IP, it will set the iplink to 192.168.1.2
If you are having problems getting it to work: LAN/WAN
1. Disable the WINDOWS FIREWALL
2. Operation ->Site -> Gateway list - Communication Status - Gateway not Connected (EntraPass Corporate Gateway Services is stopped start the services)
3. Check PC's IP info - C:\IPconfig /all
4. ping the iplink from the server
If you are having problems getting it to work: Public IP
set entraPass to the public IP, forward the ports