Page 1 of 1
EST3 SDU recovery from panel
Posted: Tue May 21, 2013 9:57 am
by carabou524
Got an EST3 panel installed in 2008. Can't find the SDU file anywhere. Does EST have any software that I can use to recover the SDU file directly from the 3-CPU. I understand that I can create a "new" project using that panels LRM configuration, and then upload, but I'll lose my labels and rules, right?
I have the 5.02 3-sdu software.
Thanks!
Re: EST3 SDU recovery from panel
Posted: Tue May 21, 2013 11:26 am
by dlamartine
Dear friend,
Its impossible upload the database from CPU. You can create a new project, but you will lose all labels and rules.
I lived this situation.
Re: EST3 SDU recovery from panel
Posted: Sun Jun 09, 2013 5:15 pm
by MISTI63
is it possible to recover database on paper by connecting printer to panel cpu est3
Re: EST3 SDU recovery from panel
Posted: Mon Jun 10, 2013 9:02 pm
by pyrosucks
Yes, but only if the printer was enabled when originally programmed.
Re: EST3 SDU recovery from panel
Posted: Fri Jul 05, 2013 12:21 pm
by MISTI63
i have to program a secutron fire alarm panel model:mr-2900
kindly provide me with software and cord pin configuration.
Re: EST3 SDU recovery from panel
Posted: Sun Jul 07, 2013 1:00 pm
by MISTI63
i was programming est3 panel.every thing was fine till then. Suddenly tx light on aux power card stopped blinking and panel showing RAIL COMMUNICATION FAIL.
KINDLY tell me how to solve it.now i am unable to get any COMMUNICATION in loop card.
pleaseeeee help.
Re: EST3 SDU recovery from panel
Posted: Fri Jul 19, 2013 7:07 am
by MISTI63
MISTI63 wrote:i was programming est3 panel.every thing was fine till then. Suddenly tx light on aux power card stopped blinking and panel showing RAIL COMMUNICATION FAIL.
KINDLY tell me how to solve it.now i am unable to get any COMMUNICATION in loop card.
pleaseeeee help.