3-MODCOM Rule Question
Posted: Fri Jul 10, 2015 5:04 pm
Do you guys think this would work correctly.
I am using CT2 and CT1 to get Trouble Fire and Supervisory from old analog panels in an apartment complex.
Naming scheme looks like this:
BLDG_001_FIRE
BLDG_001_TRB
BLDG_001_SUP
There are 16 buildings and we will be transmitting in Contact ID.
This seems to be compiling fine I just wont have a chance to test it tell Monday morning.
I am using CT2 and CT1 to get Trouble Fire and Supervisory from old analog panels in an apartment complex.
Naming scheme looks like this:
BLDG_001_FIRE
BLDG_001_TRB
BLDG_001_SUP
There are 16 buildings and we will be transmitting in Contact ID.
Code: Select all
[FIRE ALARM SEQUENCE]
ALARM '*<N:1-16:3>_FIRE':
+SEND 'ACCOUNT_NUMBER' MSG "111000<N:3>",
-SEND 'ACCOUNT_NUMBER' MSG "311000<N:3>";
[TROUBLE ALARM SEQUENCE]
TRB '*<N:1,4-16:3>_TRB':
+SEND 'ACCOUNT_NUMBER' MSG "137300<N:3>",
-SEND 'ACCOUNT_NUMBER' MSG "337300<N:3>";
[SUPERVISORY ALARM SEQUENCE]
SUP '*<N:1,4-16:3>_SUP':
+SEND 'ACCOUNT_NUMBER' MSG "120000<N:3>",
-SEND 'ACCOUNT_NUMBER' MSG "320000<N:3>";