TheAlarmTech.com

Hi everybody,
after have been downloaded code,database and bootstrap on an EST3 panel i see below fault message on LCD card:
1. database out of sync with cpu
2. unprogrammed device data card
3. auxiliary data card
any one can help me please to solve these fault?
many thanks.

these are all common probables.
it sounds like you are putting a EST3 network together for the first time.
1. out of sync - load all the CPUs
2. unprogrammed device - by methodical with respect to the devices on the SLC loop and what you program in the database.
look at this posts read it 3 times it will be very helpful - "http://www.thealarmtech.com/forum/viewt ... ?f=5&t=326"

thanks again "Leo"