Northern N-1000IV Power Fail pfail LED

Winpak-PE/SE , NStar, N1000, PW2000
Post Reply
Leo
Site Admin
Posts: 889
Joined: Thu Dec 11, 2008 7:52 am

Northern N-1000IV Power Fail pfail LED

Post by Leo »

Northern N-1000IV Power Fail pfail LED LED15
If PFAIL led is on the panel will not run
clear the memory connect both AC and Battery, battery first
if this does not work hit it with a large hammer.

JP9 JP10
memory backup battery is not a battery it is a capacitor, does not go bad.
put jp9 jumper in jp10, wait 20 seconds, no need to power up.
put jp9 back or pfail will flash fast
jp10 clears memory

you will know that the memory is clear if when panel is powered up all 4 relays turn on they off.
Post Reply